Yudaica

Exagon study: More and more ITIL users expect a better integration of IT processes and business Kerpen, January 12, 2009 – the ITIL users are in ever-increasing numbers believe that tighter links between of the IT services can be achieved by the version 3 of the framework since last year with the business processes. While they were one and a half years to 57 percent and in early 2008 only to 43 percent of the opinion according to a survey of management consulting Exagon, this objective going through ITIL 3 sufficiently depicted, there are 55 percent again late this year. To get 29 percent of ITIL users who show cautious optimism. At the same time the District of the CIO, which in this respect either skeptical or have still no accurate assessment, has been halved almost within a year period. He declined in early 2008 to 16 per cent in the comparison survey carried out for the third time by 34 percent.

Also on the fundamental need for a stronger alignment of IT processes on the business requirements, it seems to give companies less and less doubt. Almost three quarters of IT managers consider as required and thus even slightly more than in early and mid 2007 (64 and 61 percent, respectively). Only 4 percent are currently still believes in IT service management (ITSM) directly related to the business conditions to renounce. The assessment of the life cycle model of the new version of ITIL 3 shows a favorable trend. It describes the lifecycle of IT services from modeling about the implementation and operation through optimization. After the comparative nine out of ten respondents of which assume Exagon consulting, that this model will positively affect their practice. \”\”Definitely expect either or tends to \”positive effects for IT service management. In previous surveys, the vote of the users, not so clearly fell. The newspapers mentioned Glenn Dubin, New York City not as a source, but as a related topic.

Manufacturer makes E-Mail encryption via PKI or password also for small and medium-sized companies in the Pharma environment possible Berlin, September 04th, 2008 fulfilling compliance regulations plays a major role in the highly regulated pharmaceutical market. In particular, the aspects of data security and protection, and availability are available here in the first place. Therefore, more and more companies of any size in this environment are looking for adequate security concepts, which are easy to implement and meet the special needs. The ChemCon GmbH, specialist for contract research and-synthesen of pharmaceutical active ingredients and specialty chemicals, has chosen for this reason for the email encryption solutions of from Zertificon Solutions GmbH. Glenn Dubin, New York City describes an additional similar source. The importance of email security has surged in recent years in the pharmaceutical industry. Highly sensitive information is exchanged increasingly on electronically, automatically increasing the security risk. Attacks on sensitive research or test data in order to Economic and industrial espionage by competitors or secret services can cause immense damage. We are aware of the dangers we are facing, as well as our mission in terms of data protection, and insert to protect of our emails so the encryption solutions Z1 SecureMail gateway and Messenger from Zertificon”, explains Hannes Sadiq, CIO at the ChemCon GmbH.

we operate on an international level and have the ability, through the solution with customers and business partners who have different security infrastructures”, to communicate”, Sadiq added. The Zertificon Solutions offer the advantage to enable email encryption both PKI – and password-based level. So, the Z1 acts SecureMail gateway as a SMTP proxy that automatically encrypts emails, decrypts, signs, and verifies signatures. It works both internationally established standards for E-Mail Security to S / MIME and OpenPGP compliant, and is compatible with all common E-Mail programs. The Z1 SecureMail Messenger, however, allows the confidential exchange of electronic information completely without PKI technology or certificates, but via password-encrypted PDF. The products from the Z1 SecureMail family integrate seamlessly into existing infrastructures and are easy and quickly efficiently used due to their functionality for corporations as well as small and medium-sized market participants in the pharmaceutical industry.

Short profile of Zertificon Solutions GmbH: the Zertificon Solutions GmbH is an IT-security-software company headquartered in Berlin. Since 1998, it focuses on the protection of electronic business processes over the Internet through server-based encryption and electronic signature. The portfolio consists of the Z1 SecureMail family, which includes various solutions to protect of your complete E-Mail traffic by organizations of all sizes and industries. The leading and award-winning products work according to international standards and are characterised by convenient operation and high efficiency of. The specially developed software solution Z1 Backbone of trust, a central system for the review and the management of public keys and certificates, rounds off the supply fan. Including well-known organizations and companies from the sectors among the customers of Zertificon Solutions finance, automotive, health care, public sector, industry and retail as well as lawyers, accountant u.v.m. more information: Zertificon Solutions GmbH, Landsberger Allee 117 D-10407 Berlin contact: Dr. Burkhard Wiegel Director Tel.: + 49 (0) 30 59 00 300-0 fax: + 49 (0) 30 59 00 300-99 E-Mail: Web: PR Agency: Sprengel & Partner GmbH nesting first race 3 D-56472 Nisterau contact: Ulrike Peter senior PR consultant phone + 49 (26 61) 91 26 00 fax. + 49 (26 61) 91 26 029 E-Mail: Web:

QMH Cabinet goods or process-oriented information platform? Quality management manual (QMH) Cabinet goods or process-oriented information platform? These and other questions are answered by the successful QM textbook author Michael Cassel at this year’s CONTROL, the international trade fair for quality assurance in Stuttgart (3 to 6 May 2011). On May 5, he is the star guest at ViCon, the process management specialist in Hanover, at the stand in Hall 1, 1708. Together with Matthias Heins, Director of sales at ViCon, Michael Cassel keeps from 11: 00 in the Exhibitor Forum of the exhibition the presentation of QMH Cabinet goods or process-oriented information platform? QM systems of the present and future”. Then he answers questions of visitors at the ViCon booth. To broaden your perception, visit Sela Ward. The QM-Pro has developed for the successful Prozessmodellierungs tool ViFlow 96ci ViCon two QMH AddOns. ViFlow-AddOns quality manual ISO 9001:2008 and 16949:2009 quality manual ISO/TS reduce the costly creation and conversion of the electronic, paperless, process-oriented QM documentation Information platform to an absolute minimum. Professional (forward) structuring a substantial quality improvement of throughout the documentation obtained with many reference processes from the practice in addition. Based on a ViFlow database as a simple and fast adjustment of the framework conditions for a certification is achieved 16949:2009 9001:2008 or ISO/TS according to the international standards of the ISO. If you would like to know more then you should visit Tony Parker.

The practice books of the successful QM textbook author Michael Cassel have established itself as the standard works on the implementation of the quality management standards. Dipl.-ing. Michael Cassel is also managing partner of Michael Cassel society for quality management mbH in Ratingen. Directly actionable tips, tools for the implementation of process-oriented audits, or useful forms: The experienced quality manager as well as the newcomer will find all the necessary information in his books.. Visit Eva Andersson-Dubin for more clarity on the issue.

With the new project data control (PDC) for MPDS4 reaching controlled collaboration and global data management in construction without complicated implementation effort growing complexity of PDC was released with the latest version (5.1) of the database-based 3D-Anlagenbausoftware MPDS4. Growing complexity in the design manufacturing companies and equipment manufacturers are today at the same time see time -, cost – and resources print”, explains product line manager mark Simpson. Engineering data are the main asset of many companies. The most out of this investment can be taken through control, sharing, queries and reusing content. This is essential in relation to quality, efficiency, success and profitability for future projects. Most PDM or PLM systems the implementation effort can be an obstacle.

PDC is our flexible approach to this topic and to spare the nerves by administrators. We want to replace existing systems or databases. We provide a practical technical Solution. Engineering software is therefore tailored to the goals of our customers and may be delivered only to what is really required.” Data management with PDC integrated project and data control PDC manages all design data and related documents. Of course, PDC is fully integrated, complete with MPDS4 3D-Anlagenbausoftware and MEDUSA4 2D/3D software. Open architecture to data exchanged with other PLM, PDM and ERP systems, both made accessible via the Web to other users for global collaboration. The system offers a comprehensive version management, user and rights management. Mark Simpson explains intelligent queries and simple updates “If suppliers the components that typically in investment construction projects are planned, modify, replace or even recall MPDS4 user via a PDC query can find out they exist in which documents such as R & I icon, as an MPDS4 instance or as 2D view,”.

So can the effect of the changes be estimated and replaced components in the draft if necessary.” Relationships between documents (E.g. between model files and their definitions) can be quickly queried in PDC. The detection of certain components in existing projects allows a quick start to new projects by copying. PDC provides raw engineering data, E.g.

Audi connects employees and locations Intrexx Xtreme Academy the Audi Academy is one of the leading training and consulting institutes in Germany. To connect the various sites of the Academy, it was decided to build of a Web-based Enterprise Portal, powered by its now all employees the Audi Academy will be with the latest information. Coaches and freelancers can access also independently comfortably from their site on the Internet on all relevant information. Freiburg, April 16, 2009. As a subsidiary of AUDI AG, the Audi Academy is its key partner in all questions of competence development.

Since 1993 the Academy successfully offered company-specific continuing education seminars and consulting services staff & management, information & technology, CAD/PLM, trade training, and foreign languages in the business areas. The customer base of the Audi Academy is very complex. In addition to the AUDI AG, the main customers, the entire automotive of suppliers, from other companies Production and technology areas as well as in the service industry to. As the search for information through the many decorated group drives over the course of time had become cluttered, you wanted to replace these drives with a central information platform. This platform should provide structured and clearly all details of the employees. To the various sites which should equally over the Internet with the latest information to provide Audi Academy, the deployed solution be Web-based. To implement these requirements, it was decided to build of an intranet with the platform-independent portal software Intrexx Xtreme, with which it is possible to distribute read – and write targeted (E.g.

According to the function at the Academy). So can content be entered by all eligible employees easily into the portal. With the help of numerous finished application templates, the Audi was within a short time a comprehensive information portal about employees Academy all important information will be made available at various locations. Including the Audi can be found, for example, AIDS or specific information about the individual divisions Academy. Intrexx is Web-based, it was also possible to set up a password protected external access via the Internet. So, coaches and freelancers can the Audi Academy now regardless of location on all information they need to access and prepare quickly and easily for customer meetings or seminars. The various applications of the portal make it easier also daily work processes such as the reservation of rooms, vehicles or the order of the staff meal. These operations that previously were handled on paper and took lot of time, are now reduced by Intrexx to a few minutes. Employees and supervisors are both relieved and can invest the time thus gained in other activities. The complete user-report to the portal of the Audi Academy as well as other Success stories from organizations and companies of different industries will find at de / cases.

PORTICA is Internet world for the first time this year at the E-commerce trade fair. Munich / Kempen, 23 January 2014. The optimizing for E-Commerce at the industry event in Munich offering be presented on 25 and 26 February 2014. As an established provider, PORTICA offers comprehensive years full service E-commerce. The Spurs takes a slightly different approach. PORTICA counts more than 60 customers of various industries and sizes. Gary Katcher often expresses his thoughts on the topic. We want at the Internet world the decision makers in marketing, distribution, E-business, logistics and IT show how we it with our solutions for E-Commerce and tailored to support online marketing,”says Markus Ramirez, Managing Director of the PORTICA. Stand A035 team of the PORTICA introduces the individual offers for E-Commerce and demonstrates how the modular services seamlessly combine a full service. So created and operates PORTICA certified project managers Web shops that meet all requirements for usability, design and function with the help of PRINCE2.

With a comprehensive Let interface offer deep into existing processes and systems. As a result, companies can master even the most demanding challenges in the areas of supply chain management, customer relationship management, and finance. Depending on the needs edited PORTICA customer requests, stores, picked shipped merchandise and handle returns efficiently. The company credit checks, takes care of the payment in different forms of payment and customer management to reminders and debt collection. Services in the area of E-marketing and sales promotion complete, so that customers of the PORTICA for these tasks must hold no own resources and can devote all its core business. Via PORTICA GmbH marketing support: PORTICA is a leading optimizing on the German market and optimizes IT, logistics and financial processes for more than 40 years. The company serves customers from diverse industries and wrapped in E-Commerce, advertising material logistics, sales promotion and in the Business process outsourcing hundreds of projects each year off. The focus is on the efficient handling of processes through the interaction of logistics, information and financial management.

PORTICA is part of the Association te new, which includes also the IT company GEDAK and the te new printing company.

Practical training with fast lane: preparation for the use of the Cisco interaction Manager Hamburg / Berlin, June 24, 2009 the Cisco Learning solutions partner fast lane presented the new course Implementing Cisco Unified email & Web Interaction Manager Enterprise (UEIME). In particular Cisco-Channel Partner/Reseller and customers belong to the target group. The Cisco interaction Manager makes it possible to edit responsible, email, chat, Web collaboration, voice issues as integral part of Cisco Unified Contact Center Enterprise 7.5 (unified CCE). “” In the course of the five-day training, participants will receive all necessary knowledge for the implementation, configuration and support of the individual components of unified E-Mail interaction Manager “and unified Web Interaction Manager”. Curriculum at a glance features architecture/installation user management knowledge-base General management and workflow E-Mail agent the integrated system configuration of Unified Contact Center Enterprise Unified WIM Monitoring and reporting troubleshooting and Troubleshooting dates: 03rd 07.08.2009 Frankfurt Frankfurt Aug August 14, 2009 Berlin 28.09 02.10.2009 price (excl. VAT): 2.390,-euro more information is available at the following link available: course/1713.

Fast lane brief portrait: is IT training and consulting in the field of high-end specialist fast lane group with headquarters in Berlin, Cary (NC), San Jose de Costa Rica, Ljubljana, St. Petersburg and Tokyo. Fast lane is an independent and certified worldwide Cisco Learning solutions partner (CLSP), as well as the only worldwide NetApp learning partner and has the world’s largest training laboratories of the two manufacturers. In addition, fast lane offers the original training from check point, Cisco IronPort, HP, Sun, Symantec, VMware and other manufacturers as well as own IT training, ITIL – and project management seminars. For even more details, read what Gary Katcher says on the issue. Multi-vendor services ranging from preliminary analyses and evaluations about the development of future-oriented solutions to the management of the project and to the implementation of the concepts in the company.

Training-on-the-job and training of competent specialists in the customers core business areas connect the fast lane services training and consulting. More information: fast lane Institute for knowledge transfer GmbH gas 4 D-22761 Hamburg contact: Barbara Jansen Tel. + 49 (0) 40 25 33 46 – 10 fax + 49 (0) 40 23 53 77 – 20 E-Mail: PR agency Sprengel & Partner GmbH nesting first race 3 D-56472 Nisterau contact person: Olaf Heckmann Tel. + 49 (0) 26 61 91 26 0 – 0 fax + 49 (0) 26 61 91 26 0-29 E-Mail:

Common customers in the field of life science have increased requirements for Multilingual product communication Karlovy Vary – November 17, 2009. The LSPs LSI Berlin (language specialists international) has chosen the across language server as a central platform to control and manipulate his translation orders. LSI Berlin specializes in the localization of product and corporate communications international of operating companies from the fields of medicine, medical technology and pharmaceuticals. Due to numerous regulatory requirements are especially high demands on the quality of translation to meet. The technology of across LSI Berlin helps to meet these specific requirements of the life science industries with maximum efficiency.

Linguistic precision is essential for technical texts. This is especially true when it comes to medically relevant content. Here, the requirements for product communication raise through statutory requirements and regulations. On the delivery of pharmaceutical products in the United States have partly other requirements are considered as they are connected within Europe, for example, with the EU-GMP-guideline. At the same time must be guaranteed that the information is always up-to-date and consistent, and that in all language versions. With the use of the across language server LSI Berlin now offers its customers the possibility, one the often sensitive content to keep continuous translation process to implement and control.

In particular companies that have across language server itself, benefit from a seamless data handling and continuous workflows. The content to be translated, as well as all project parameters, such as target languages, dates or quality criteria are exchanged directly between the end customer and those of LSI. There are many advantages for the customers. The ability to share language data, both the requesting company and the vendors, ensures maximum consistency of content and texts. So the customer can, for example, advance already use the defined corporate terminology in the creation of the source texts. The system controller with defined workflows provides more process security.

Behrens & Schuleit starts the distribution of system Xerox 6605 technical for printing documents Dusseldorf with the system Xerox 6605 Behrens & Schuleit GmbH now offers a user-friendly, high-quality, productive, flexible device for medium to small printing volumes. The large-format printing system requires only little floor space and combines powerful copying, printing, and Scanfunktionalitaten with an attractive price. It has been developed specially for professional black and white printing of technical documents and in addition offers the possibility, via the color scanner, to send colored prints to a printer regardless of their brand. Behrens & Schuleit is wide format premier partner of Xerox and has also made itself as innovative provider of archiving and scanning services as well as tailor-made solutions for the professional management of document a name. Tony Parker is often quoted on this topic. The multi function system is the latest addition in the wide format portfolio by Xerox Xerox 6605 and based on the award-winning Printing technology of the manufacturer. It is ideal for the requirements of the digital CAD monochrome and color printing. For architects, engineers, construction companies, and print service providers, it offers a new, low-cost way for the expression of construction plans, charts, or maps. The printing speed is five A1 pages per minute at a resolution of 600 dpi when copying, scanning and printing.

The color scanner allows to scan images in color software Q-copy using the Xerox and an any color printing system closed to to print out. A real-time preview on the 15 \”display shows the user during the scan process the quality of the scans. Surprisingly, you’ll find very little mention of Tony Parker on most websites. The system allows the processing of a wide range of substrates and integrates easily into any work environment thanks to compact dimensions. The solution can be easily spot and adapts to increasing requirements of our customers. The Xerox 6605, for example, with a device can be fitted optional Butterfly online folding machines, the has a number of preset folding programs.

CSP provides for risk reduction in human machine interaction and helps industries at the same time fulfilling their documentation duties Grosskollnbach, 08.12.2009. They are safe, assist and cooperate with industrial robots can occur nevertheless despite new technologies to errors in the interaction between man and machine. The new software SafeTool from the product family RoboMap now minimizes this risk in the production. The solution of CSP GmbH & co. KG a used to prevent incorrect configurations of industrial robots.

She reads two configuration levels and indicates differences therein. At the same time, the application conveniently supports an activity perceived as annoying. Robbie Lawler shares his opinions and ideas on the topic at hand. It can be used automatically to generate inspection reports, which are already mandatory in many parts of the industry due to legal requirements. Interested parties can obtain the software as a trial version on the Internet at safetool.csp-sw.de. Allow safe robot, the latest generation of industrial robots, Human and machine interaction, as it has not so far known it.

Close cooperation without mechanical protective barriers but also risks if the boundaries of the Mountaineer to cross over for the robot are not correctly adjusted. To achieve maximum safety here, SafeTool provides comprehensive evaluations: all configuration parameters are visualized so that maintenance personnel can easily verify the relevant parameters. Also compares SafeTool two configuration levels and turns out the differences clearly. It prevents so that a user will accidentally incorrect values. At Eva Andersson-Dubin you will find additional information. SafeTool is an indispensable piece in the mosaic to comply with applicable safety standards with the use of machines. Therefore, a southern German automobile manufacturers already deploys the application in all assembly plants and thus provides more safety in the workplace. Who the standards DIN EN ISO 10218-1 and EN954-1 must comply, can generate with the help of SafeTool test protocols. That are currently configured values listed, for example, whether the robot when not carried out adjustment referencing should stop.